Welcome to the official website of Guangzhou Dcnel furniture manufacture Co. Ltd.

   Contact Us

Guangzhou Dcnel furniture manufacture Co. Ltd.

Contact: Alice

Mobile phone: +86 15970696203

Telephone / Fax: 020-32439669

Address: No. 9 factory building, D, Baiyun Hu Long Industrial Zone, Baiyun District, Guangzhou.

Email: Alice@dcnel.com

Company news
Position:Home > News > Company news

Maintenance skills of office furniture?

Published Date:10-26-2018    Source£º    Author£º  Viewed£º987

Cloth art

Many enterprises will be equipped with a certain number of reception rooms cloth furniture, so that the reception of customers have a sense of intimacy. Most of the fabrics used by these cloth artists are soft and comfortable, easy to be dirty and damaged, and special attention should be paid to their cleaning problems in maintenance. For products made from imported fabric after dust-proof and anti-fouling treatment, it is only necessary to wipe them with a clean wet towel. For those products that are particularly vulnerable to dirty and perishable, it is recommended to send to a professional cleaner to clean, can prevent deformation, prolong its service life.

Electroplating and sandblasting glass

Electroplated and sandblasted glass office furniture mostly for staff lounge tea table, seats and other products, the surface of these office furniture is bright, it is easy to see fingerprint stains and affect the beauty of product surface coating. But these products are much easier to maintain than the above three categories. Usually, you just need to avoid putting it in a sleepy environment; when cleaning, you just need to wipe it lightly with a dry cloth to make it shiny and fresh. However, when moving, be careful not to grasp the glass table and move.

Solid wood

Solid wood office furniture mostly for desks and chairs, maintenance to clean, put and move three areas to pay more attention. Avoid sharp scratches when cleaning, and do not use wire brushes or hard brushes to clean stubborn stains. Use a soft rag dipped in a strong detergent to wipe. When placing it, we should also pay attention to avoid direct sunlight, which makes the paint on the surface fast oxidized. In addition, be careful in moving, avoid bumping and damaging the surface of paint.

Dermis

Dermal office furniture is often used in high-level leadership office to highlight the enterprise grade, itself has good softness and color, maintenance is not good is easy to damage. In maintenance, we need to pay more attention to the two aspects of placing and cleaning. When placed, like wooden office furniture, sunlight should be avoided as far as possible. When cleaning, it should be dipped in fine velvet cloth with a small amount of water for wiping, with a soft dry cloth to dry.

Plate type

Some of our friends in life will ask how to maintain our board furniture to better extend the service life.

First, the floor of the panel furniture must be leveled and the four legs balanced. If the board furniture is placed in a state of constant swing and instability after a long period of time will inevitably make the fastening parts fall off and the bonding part cracks, thus affecting the use effect and reducing the life of the board furniture. In addition, if the ground is soft so that board furniture imbalance, do not use wood or iron pad furniture legs, so even if maintain balance, it is difficult to force uniform, long-term will damage the internal structure of board furniture. The way to compensate for this is to trim the floor or spread it with a slightly larger area of hard rubber so that the four legs of the panel furniture can land smoothly.

Secondly, it is recommended to use cotton knitted fabrics when removing dust from panel furniture, and then use a soft wool brush to remove dust from dents or reliefs. Painted board furniture, avoid using gasoline or organic solvent wipe, can be used colorless furniture polishing wax wipe, to enhance gloss and reduce dust.

Thirdly, the location of the board furniture suggested not to be exposed to direct sunlight, often sunlight will make furniture paint film fade, metal parts easy to oxidize deterioration, wood easy to brittle. Summer suggests using curtains to cover the sun to protect panel furniture.

Summary is to maintain indoor humidity. Don't let plate furniture get damp. In spring and autumn, humidifiers should be used to limit time to prevent furniture damage due to excessive humidity. Usually clean furniture as little water as possible, more need to avoid alkaline water, only appropriate to use the wet cloth screw water, and then wipe clean with dry cloth.

As long as the above points are achieved, your home style furniture will keep a bright and bright feeling for a long time.

Next£º No message!